Code:
Apple RackMac3,1 5.1.7f2 BootROM built on 12/09/04 at 10:58:45
Copyright 1994-2004 Apple Computer, Inc.
All Rights Reserved.
Welcome to Open Firmware, the system time and date is: 14:47:24 05/21/2008
To continue booting, type "mac-boot" and press return.
To shut down, type "shut-down" and press return.
ok
0 > setenv input-device scca ok
0 > setenv output-device scca ok
0 > boot /ht/pci@5/firewire@e/node@00d04b200070042b/sbp-2@c000/disk@0:,\install\yaboot
sbp2:Open ->login?
speed=ffffffff 2 2 load-size=25624 adler32=aa6b7e8e
Loading ELF
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 Config file read, 2328 bytes
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 Welcome to Ubuntu Server 8.04 (Hardy Heron)!
This is an Ubuntu Server installation CDROM,
built on 20080424.
The default option is 'install'. For maximum
control, you can use the 'expert' option.
If the system fails to boot at all (the typical
symptom is a white screen which doesn't go away),
use 'install video=ofonly' or 'expert video=ofonly'.
Press the tab key for a list of options, or type
'help' for help.
************************************
If in doubt, just press Enter, and if that
doesn't work, type 'install video=ofonly'.
************************************
Welcome to yaboot version 1.3.13
Enter "help" to get some basic usage information
sbp2:Open ->login?
speed=ffffffff 2 2 boot:
* install expert install-powerpc64
expert-powerpc64 check check-powerpc64
rescue rescue-powerpc64
boot: expert-powerpc64 console=ttyS0,57600n8 DEBIAN_FRONTEND=text
Please wait, loading kernel...
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 Elf64 kernel loaded...
Loading ramdisk...
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 ramdisk loaded at 01d00000, size: 5802 Kbytes
OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020
command line: ro ramdisk_size=8192 file=/cdrom/preseed/ubuntu-server.seed priority=low -- consotmemory layout at init:
alloc_bottom : 00000000022ab000
alloc_top : 0000000030000000
alloc_top_hi : 0000000120000000
rmo_top : 0000000030000000
ram_top : 0000000120000000
Looking for displays
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x00000000025ac000 -> 0x00000000025ad357
Device tree struct 0x00000000025ae000 -> 0x00000000025c1000
Calling quiesce ...
erasing fff04000 of Micron B1 part
flashing fff04000 of Micron B1 part
swapping blocks
DO-QUIESCE finishedreturning from prom_init
Hello World !
[ 0.000000] Starting Linux PPC64 #1 SMP Thu Apr 10 13:55:52 UTC 2008
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] physicalMemorySize = 0xa0000000
[ 0.000000] htab_address = 0xc00000011c000000
[ 0.000000] htab_hash_mask = 0x7ffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-16-powerpc64-smp (buildd@ross) (gcc version 4.1.3 20080308 )CF000012
Setup Arch
[ 0.000000] [boot]0012 Setup Arch
[ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255
[ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
[ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=426, gen1=425
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 1179648
[ 0.000000] Normal 1179648 -> 1179648
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 524288
[ 0.000000] 0: 1048576 -> 1179648
CF000015
Setup Done
[ 0.000000] [boot]0015 Setup Done
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 639232
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: ro ramdisk_size=8192 file=/cdrom/preseed/ubuntu-server.seedt[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 120 sources
[ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 124 sources
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000003] clocksource: timebase mult[7800001] shift[22] registered
[ 0.012358] Console: colour dummy device 80x25
[ 0.024303] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.042695] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.057812] freeing bootmem node 0
[ 0.109258] Memory: 2470116k/2621440k available (5840k kernel code, 151324k reserved, 784k d)[ 0.130148] SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=2, Nodes=16
[ 0.233776] Security Framework initialized
[ 0.241587] SELinux: Disabled at boot.
[ 0.249239] AppArmor: AppArmor initialized
[ 0.257386] Failure registering capabilities with primary security module.
[ 0.271110] Mount-cache hash table entries: 256
[ 0.283911] Initializing cgroup subsys ns
smp_core99_probe
[ 0.294745] PowerMac SMP probe found 2 cpus
[ 0.303112] KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000
[ 0.316033] channel 0 bus <multibus>
[ 0.323323] channel 1 bus <multibus>
[ 0.330631] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
[ 0.345722] channel 0 bus <multibus>
[ 0.353029] PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
[ 0.366209] channel 1 bus <multibus>
[ 0.373501] channel 2 bus <multibus>
[ 0.380879] Processor timebase sync using Pulsar i2c clock
[ 0.391733] mpic: requesting IPIs ...
smp_core99_kick_cpu
smp_core99_kick_cpu done
[ 0.408012] Processor 1 found.
[ 0.458570] Brought up 2 CPUs
core99_setup_cpu 0 done
[ 0.501310] net_namespace: 120 bytes
[ 0.508850] NET: Registered protocol family 16
[ 0.517439] IBM eBus Device Driver
Linux ppc64
#1 SMP Thu Apr 10 13:55:52 UTC 2008
[ 0.533727] CPU Hotplug not supported by firmware - disabling.
[ 0.586828] IOMMU table initialized, virtual merging disabled
[ 0.624889] NET: Registered protocol family 8
[ 0.633219] NET: Registered protocol family 20
[ 0.642222] AppArmor: AppArmor Filesystem Enabled
[ 0.645962] Time: timebase clocksource has been installed.
[ 0.663258] NET: Registered protocol family 2
[ 0.711151] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.726666] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.747957] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.762397] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.775261] TCP reno registered
[ 0.791235] checking if image is initramfs... it is
[ 1.450832] Freeing initrd memory: 3072k freed
[ 1.459604] Freeing initrd memory: 2726k freed
[ 1.468612] nvram_init: Could not find nvram partition for nvram buffered error logging.
[ 1.529968] Registering G5 CPU frequency driver
[ 1.538653] Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
[ 1.550976] Low: 1800 Mhz, High: 2300 Mhz, Cur: 1800 MHz
[ 1.586397] audit: initializing netlink socket (disabled)
[ 1.596845] audit(1211381411.348:1): initialized
[ 1.606226] Total HugeTLB memory allocated, 0
[ 1.618339] VFS: Disk quotas dquot_6.5.1
[ 1.625910] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.638941] io scheduler noop registered
[ 1.646464] io scheduler anticipatory registered
[ 1.655663] io scheduler deadline registered
[ 1.664354] io scheduler cfq registered (default)
[ 1.673558] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0001:00:02.0 subordinate b.[ 1.690909] AMD8131 rev 12 detected, disabling PCI-X MMRBC
[ 1.748456] Generic RTC Driver v1.07
[ 1.756409] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 1.771138] MacIO PCI driver attached to K2 chipset
[ 1.781787] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.797049] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.809565] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.841981] ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39
[ 3.431085] mice: PS/2 mouse device common for all mice
[ 3.441361] PowerMac i2c bus pmu 2 registered
[ 3.449916] PowerMac i2c bus pmu 1 registered
[ 3.458594] PowerMac i2c bus mac-io 0 registered
[ 3.467797] PowerMac i2c bus u3 1 registered
[ 3.476304] PowerMac i2c bus u3 0 registered
[ 3.484868] NET: Registered protocol family 1
[ 3.493464] swsusp: Registered nosave memory region: 000000007f000000 - 0000000080000000
[ 3.509584] turn off boot console udbg0
After this we get no console output, so we cannot proceed any further with the installation, or in the case of the debootstrapped system, we cannot proceed with the system as it is.
Bookmarks